Casio KL-7000 - Manual (Page 72)

71
Messages
Message Meaning Action
• There is no data stored in memory.
• There is not enough unused
memory to perform the operation.
• Printer is performing printing
operation.
• Printing is paused for a tape cut
operation.
• The name you are using when
storing data in memory is already
used.
• Text is too long to fit in the
specified tape length.
• Text has too many lines to fit on
tape.
• Text has too many line to fit into a
frame.
• Unit is asking for the starting point
of the operation you are perform-
ing.
• Previously input text cannot be
combined with new input text.
• Current operation cannot be
performed using 6mm tape.
• The operation you have selected
will clear the text you previously
input.
• Memory data has become
corrupted for some reason.
• Memory initialization is required.
• Unit is requesting input of text.
• Battery power is low.
• Memory is full and data cannot be
stored.
• Input text exceeds the range of the
selected format.
• Store some data before trying to
perform this operation.
• Reduce the size of the data you
are trying to store or delete data
already stored to make room for
the new data.
• Wait for printing operation to end.
• Cut the tape and then press SET to
resume printing.
• Use a different name or delete the
data in memory this is under the
same name.
• Reduce the size of the characters
or shorten the text.
• Reduce the number of lines.
• Reduce line number of lines.
• Use H and J to move the cursor
to the starting point and press SET
to specify it.
• Perform the operation and input
new text.
• Change to a different tape size.
• Proceed with the opera-tion (and
clear the text), or press ESC to
abort without clearing anything.
• Reset the unit. Note that the reset
operation deletes all data in
memory.
• Initialize memory.
• Input the text you want to print.
• Replace batteries or use AC
adapter.
• Delete data you no longer need
and make room for new data.
• Shorten text or use a different
format.
NO DATA!
NOT ENOUGH
MEMORY!
NOW PRINTING
NOW PRINTING CUT
THEN [SET]!
SAME NAME
ALREADY USED!
TEXT DOES NOT FIT!
TOO MANY LINES!
TOO MANY LINES TO
FRAME!
WHERE?
CANNOT COMBINE!
CANNOT USE 6mm
CLEARS INPUT TEXT!
DATA ERROR!
RESET!
INITIAL?
INPUT TEXT!
LOW BATTERY
MEMORY FULL!
OUT OF FORMAT
RANGE!