AOC LE24H138 Manual - Manual (Page 25)

25
adjust pC Setting
This setting is only available in pC mode.
1
M U
/ Exit
EN
Press menU/exIT to call out MENU.
2
Press ▲/▼ to select “VGA” , and press oK.
3 Press ▲/▼ to select VGA Settings: Auto adjust, H.Position, V.Position. Clock, Phase and press OK to enter.
4 Press ◄/► to adjust.
5
M U
/ Exit
EN
Press menU/exIT to exit.
pC Setting description
auto adjust
Auto sync. PC timing to fit full screen display.
For detail supported timing, please refer PC Input Signal Reference Chart.
h. position Adjusts the Horizontal position.
V. position Adjusts the Vertical position.
Clock Adjusts the Clock frequency on VGA signal.
phase Adjusts the Phase on VGA signal.
Move Select Exit
VGA
V.Position
Clock
Auto Adjust
Phase
H.Position
0
0
0
0
Englis
h