Lcd/led screen, Wiring, Electric shock – AOC LE24H138 Manual User Manual

Page 5: Lightning storms, When not in use, Overloading, Englis h

Advertising
background image

5

lCd/led Screen

Although the LCD/LED screen is made with high-precision

technology and has effective pixels of 99.99% or more, black dots

or bright points of light (red, blue, or green) may appear constantly

on the LCD/LED screen. This is a structural property of the LCD/

LED panel and is not a malfunction.

The LCD/LED screen is made with high-precision technology and

to achieve a high level of performance and picture quality, this

TV’s backlight setting is set to maximize the brightness of the TV.

However, uneven brightness may be observed when the LCD/

LED TV is viewed in a dark ambient without an input source or a

blank screen. This condition is normal and not a malfunction of the

TV. Changing the Picture mode, Backlight setting, enabling the

Light Sensor, or turning on the Power management will improve

this condition.

Do not expose the LCD/LED screen surface to direct sunlight.

Doing so may damage the LCD/LED panel.

Do not push or scratch the LCD/LED screen, or place objects on

top of the TV. The image may be uneven or the LCD/LED panel

may be damaged.

If the TV is used in a cold place, a smear may occur in the picture

or the picture may become dark. This does not indicate a failure.

These phenomena improve as the temperature rises.

Ghosting may occur when still pictures are displayed continuously.

It should disappear after a few moments.

The screen and cabinet get warm when the TV is in use. This is

not a malfunction.

Avoid spraying insect repellent with volatile material on the

screen.

Avoid prolonged contact with rubber or plastic material.

Broken pieces

Do not throw anything at the TV. The screen glass may break by the

impact and cause serious injury.
If the surface of the TV cracks, do not touch it until you have

unplugged the AC power cord. Otherwise electric shock may result.

handling of broken glass and liquid crystal leakage

If the LCD/LED panel gets damaged, crystalline liquid leakage may

occur, or scattered broken glass may result. Do not touch broken

glass or crystalline liquid which is toxic, with bare hands as cuts,

poisoning or skin irritation may occur. Also, do not let glass fragments

or leaked crystalline liquid get into your eyes or mouth. Should either

contact your eyes or mouth, rinse the contacted area thoroughly with

water and consult your doctor.

Wiring

When connecting cables, be sure to unplug the AC power cord for

your safety. Take care not to catch your feet on the cables. It may

damage the TV set.

electric Shock

Do not touch the AC power cord or the TV with a wet hand. If you

plug/unplug the AC power cord from the TV with a wet hand, it may

cause electric shock.

lightning Storms

For added protection for this TV during a lightning storm, or when it

is left unattended and unused for long periods of time, unplug it from

the wall outlet and disconnect the antenna. This will prevent damage

to the TV due to lightning and power line surges.

When not in Use

If you will not be using the TV set for several days, the TV set should

be disconnected from the AC power outlet for environmental and

safety reasons. The TV set is not disconnected from the AC power

source when the TV set is switched off. To disconnect the TV set

completely, pull the plug from the AC power outlet.

overloading

This TV set is designed to operate on a 120 V AC supply only. Take

care not to connect too many appliances to the same AC power

outlet as this could result in a fire or an electric shock.

Englis

h

Advertising