AOC L19W831 User Manual
Page 19
18
For TV Set-Top Boxes with DVI
1.
Turn off the power to the TV and TV Set-Top Box.
2.
Using a HDMI-DVI cable, connect the DVI end to your TV Set-
Top Box and the HDMI end to the HDMI Input at the rear of the
TV.
3.
Turn on the power to the TV and TV Set-Top Box.
4.
Select HDMI using the INPUT button on the remote, side of the
TV, or directly by pressing the PC/HDMI button on the Remote
Control.
Using Component Video
Connecting your TV Set-Top Box (Better):
1.
Turn off the power to the TV and TV Set-Top Box.
2.
Connect the Pr (red color) connector on your TV Set-Top Box to
the corresponding Pr (red color) connector in the Component
group.
3.
Connect the Pb (blue color) connector on your TV Set-Top Box
to the corresponding Pb (blue color) connector in the
Component group.
4.
Connect the Y (green color) connector on your TV Set-Top Box
to the corresponding Y (green color) connector in the
Component group.
Note:
a)
The HDMI input on the TV supports High-bandwidth Digital
Content Protection (HDCP). HDCP encrypts the transmission
between the video source and the digital display for added
security and protection.
b)
Refer to your TV Set-Top Box user manual for more information
about the video output requirements of the product or consult
your cable or satellite operator.
c)
The DVI to HDMI connection provides video only. Connecting an
alternate audio player to PC audio port is required for audio.
ENGLISH