AvMap APRS - Manual (Page 20)

Appendix: Units setup
Set up instructions for:
Geosat 6 APRS APRS
with the following devices:
• Kenwood TH-D72 A/E
• Kenwood TM-D710 A/E
• Kenwood TM-D700 A/E
• Kenwood TH-D7 A/E
AvMap Geosat 6 APRS Setup
• Make sure the interface is set to 9600 (this is the
default).
• Make sure that contacts are displayed.
• Make sure that APRS Contact timeout is Off.
The Geosat 6 APRS is now set up and ready to interface
with the radio.
20 - AvMap