BASO G196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve - Manual (Page 5)

G196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve Installation Instructions 5
Technical Specifications
Product G196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve
Rated Inlet Pressure 0.5 psi (35 mbar [3.5 kPa])
Valve Body Aluminum
Permissible Ambient
(Surface) Temperature -20 to 175°F (-29 to 79°C) nitrile diaphragm
-40 to 175°F (-40 to 79°C) silicone diaphragm
Available Magnetic
Operator Cover Styles Aluminum side conduit hub
Aluminum top conduit hub
Aluminum top without conduit hub
Aluminum side outlet with eyelet
Steel top conduit hub
Plastic with 1/4 in. (6.35 mm) male quick-connect terminals
Electrical Rating 25 VAC, 60 Hz, 0.3 ampere draw for each operator
120 VAC, 60 Hz, 0.05 ampere draw for each operator
Regulator Adjustment
Range Bottom Adjust Regulators:
Top Adjust Regulators: 3 to 6 in. W.C. (7.5 to 15 mbar [0.75 to 1.5 kPa])
8 to 12 in. W.C. (20 to 30 mbar [2.0 to 3.0 kPa])
3 to 6 in. W.C. (7.5 to 15 mbar [0.75 to 1.5 kPa])
6 to 12 in. W.C. (15 to 30 mbar [1.5 to 3.0 kPa])
Wiring Connections 1/4 in. (6.35 mm) male quick-connect terminals or
30 in. (762 mm) lead wires (other lengths are optional)
Inlet and Outlet Body
Connection 1/2 in. NPT inlet x 3/8, 1/2, or 3/4 in. NPT outlet
Pilot Outlet 1/8 in. NPT, left or right (1/4 in. cc also available)
Pressure Taps 1/8 in. NPT, inlet and outlet
Types of Gas Natural, Liquefied Petroleum (LP), and LP gas-air mixtures
Accessories Conversion Kits: Natural gas to LP gas:
LP gas to natural gas:
top adjust regulator
bottom adjust regulator
top adjust regulator
bottom adjust regulator Y71GF-4
Y71GF-3
Y71QH-2
Y71QH-3
Packaging Bulk pack supplied to original equipment manufacturer (individual pack optional)
Bulk Pack Quantity 18
Bulk Pack Weight 39 lb (18 kg)
Agency Listing
CSA Certificate Number 229521-1656041 C
Australian Gas Association Certificate Number 3495 (G196HGH and G196NGH only)
AGA Regulator Adjustable, Class 2, Grade 20; Automatic Class 3
Specification Standards ANSI Z21.78, CSA 6.20
AS 4624
Performance specifications are nominal and conform to acceptable industry standards. All agency certification of BASO products is performed under dry
and controlled indoor environmental conditions. Use of BASO products beyond these conditions is not recommended and may void the warranty.
Product must be protected if exposed to water (dripping, spraying, rain, etc.) or other harsh environments. The original equipment manufacturer or end
user is responsible for the correct application of BASO products. Consult BASO Gas Products LLC for questionable applications. BASO Gas Products
LLC shall not be liable for damages or product malfunctions resulting from misapplication or misuse of its products.
Refer to the G196 Series BASOTROL Redundant Combination Gas Valve with Manual Shutoff Valve Product Bulletin (LIT-4350330) for necessary
information on operating and performance specifications of this product.
1007 South 12th Street
PO Box 170
Watertown, WI 53094
www.baso.com
1-877-227-6427 (1-877-BASOGAS) Printed in U.S.A.