BlackVue Integrated V.2.00 - Manual (Page 15)

13
Event Recording
If the BlackVue detects an impact above the threshold, the device automatically
records video before/after the event.
You can adjust the sensitivity of the BlackVue detecting an impact in [Set
Sensitivity]. (
X See Page 29)
You can set different sensitivities between normal recording mode and
parking mode.
G-sensor (3-axis Acceleration Sensor)
y The BlackVue records event video with its G-sensor detecting an impact.
y The G-sensor, a 3-axis acceleration sensor, is composed of X-axis (front / rear),
Y-axis (right / left), and Z-axis (top / bottom).
y You can check the G-sensor information of the files recorded in the BlackVue
Software, a viewer for the BlackVue.
y You cannot use G-sensor values measured by the BlackVue as evidence to
determine the context of an accident.
Turning off BlackVue
Turn off the ignition.
The BlackVue will turn off in about 5 seconds.
All LEDs of the BlackVue will turn off.
If the BlackVue is connected to Power
Magic (UPS unit), unplug the power cable
that is connected to the BlackVue.
BlackVue_Eng_0726.indd 13 2012-07-26 �� 4:00:47