BlackVue Integrated V.2.00 - Manual (Page 31)

29
X Voice Recording Settings: Whether to use the voice recording function or not.
X Date and Time Display: Displays date and time in the bottom left corner of the
screen while recording.
X Speed Display GPS models only :
Displays the speed of a vehicle in the bottom left corner of the screen.
Select the desired speed unit to display.
If you select [Display Off], the speed of a vehicle will not be displayed in the
recorded files.
X Record File Unit : You can set the file saving unit when recording.
X Recoding Storage Setting : The older recorded files will be deleted so that
new video can be recorded in a limited storage space.
• Time : If there is not enough storage space available, the older recorded files
will be automatically deleted.
• Type : Set memory usage proportion for each recording type when saving
recorded files. Recorded files for which the set storage space is full will be
automatically deleted in sequence. Be careful since the files recorded in the
Event Recoding mode may be deleted as well.
If storage space for files recorded in the Event Recording is full:
y Files recorded in the Event Recording mode will be automatically deleted in sequence
as well. Be careful not to delete important files. Back up the important files in another
storage medium.
X Auto Switching to Parking Mode : The device will shift to the Parking mode
automatically if there is no change in G-sensor for over 10 minutes. If G-sensor
is detected for over 30 seconds, the device will shift to the Normal Recording
mode.
The automatic shift to the Parking mode may be affected by the degree to
which each vehicle vibrates.
BlackVue_Eng_0726.indd 29 2012-07-26 �� 4:00:51