Boekel Scientific 132000-2 Economy Analog Incubators - Manual (Page 7)

6
6. Fault Diagnosis
Symptom
Possible Cause Action Required
1. Unit does not operate a. Unit not switched on
b. Unit not plugged into
power supply
c. Power supply failure
a. Switch on
b. Plug in, switch on
c. Check that other
electrical appliances on
the same circuit are
working
2. Chamber temperature
does not rise when
expected
a. Actual temperature is
higher than set
temperature
b. Temperature control
circuit fault
a. Check set temperature
b. Have unit checked by
competent person
3. Temperature continues
to rise when not
expected
a. Actual temperature is
lower than set
temperature
b. Temperature control
circuit fault
a. Check set temperature
b. Have unit checked by
competent person
7. Technical Specifications
This equipment is intended for indoor use and will meet its performance figures within
the ambient temperature range of 10
°C to 35°C, with maximum relative humidity of 80%
(non-condensing). Installation Category II (transient voltages). Pollution Degree 2 in
accordance with IEC 664. Suitable for operation at altitudes of up to 6500 feet.
Specifications:
132000 Incubator
Temperature Range:
(Ambient +5
°C) to 60°C
Supply Voltage Range: 120V +/- 10%, 50/60 Hz
230V +/- 10%, 50/60 Hz
Power Rating: Model 132000: 90W
Model 132000-2: 90W