Replacement bulbs, Electrical system, High voltage devices and wiring – Buick 2012 LaCrosse User Manual

Page 361: Electrical system overload, Electrical system -35, Vehicle identification, Replacement bulbs -35, High voltage devices and, Wiring -35, Overload -35

Advertising
background image

Black plate (35,1)

Buick LaCrosse Owner Manual - 2012

Vehicle Care

10-35

Replacement Bulbs

Exterior Lamp

Bulb

Number

Back-Up Lamp

921LL

Daytime Running
Lamp (Uplevel)

3157K LCP

Front Turn Signal/
Parking Lamp

3757NAK

LCP

Headlamp High
Beam (Base)

H9

Headlamp Low
Beam (Base)

H11LL

License Plate Lamp

W5WLL

Rear Turn Signal

3757NAK

LCP

For replacement bulbs not listed
here, contact your dealer.

Electrical System

High Voltage Devices and
Wiring

{

WARNING

Exposure to high voltage can
cause shock, burns, and even
death. The high voltage
components in the vehicle can
only be serviced by technicians
with special training.

High voltage components are
identified by labels. Do not
remove, open, take apart,
or modify these components.
High voltage cable or wiring has
orange covering. Do not probe,
tamper with, cut, or modify high
voltage cable or wiring.

Electrical System
Overload

The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.

When the current electrical load is
too heavy, the circuit breaker opens
and closes, protecting the circuit
until the current load returns to
normal or the problem is fixed. This
greatly reduces the chance of circuit
overload and fire caused by
electrical problems.

Fuses and circuit breakers protect
power devices in the vehicle.

Replace a bad fuse with a new one
of the identical size and rating.

If there is a problem on the road and
a fuse needs to be replaced, the
same amperage fuse can be
borrowed. Choose some feature of
the vehicle that is not needed to use
and replace it as soon as possible.

Advertising