Buick 2012 LaCrosse - Manual (Page 399)

Black plate (73,1) Buick LaCrosse Owner Manual - 2012
Vehicle Care 10-73
7. Start the vehicle. The vehicle
must be running while using the
air compressor.
8. Turn the selector switch (B)
counterclockwise to the Air Only
position.
9. Press the on/off button (A) to
turn the compressor on.
The compressor will inflate the
tire with air only.
10. Inflate the tire to the
recommended inflation
pressure using the pressure
gauge (D). The recommended
inflation pressure can be found
on the Tire and Loading
Information label. See Tire
Pressure on page 10‑51.
The pressure gauge (D) may
read higher than the actual
tire pressure while the
compressor is on. Turn the
compressor off to get an
accurate reading.
The compressor may be turned
on/off until the correct pressure
is reached. If the tire is inflated
higher than the recommended
pressure, press the pressure
relief button (C), if equipped,
until the proper pressure
reading is reached. This option
is only functional when using
the air only hose (E).
11. Press the on/off button (A) to
turn the tire sealant and
compressor kit off.
Be careful while handling the
tire sealant and compressor kit
as it could be warm after
usage.
12. Unplug the power plug (G) from
the accessory power outlet in
the vehicle.
13. Disconnect the air only
hose (E) from the tire
valve stem, by turning it
counterclockwise, and replace
the tire valve stem cap.
14. Return the air only hose (E)
and the power plug (G) back to
their original locations.
15. Return the equipment to its
original storage location in
the vehicle.