Buick 2007 Rendezvous User Manual

Page 204

Advertising
background image

To change the current mode, select one of the
following:

H

(Vent): This mode directs air to the instrument

panel outlets.

)

(Bi-Level): This mode directs half of the air to

the instrument panel outlets, then directs the
remaining air to the floor outlets. Cooler air
is directed to the upper outlets and warmer air to
the floor outlets.

6

(Floor): This mode directs most of the air to

the floor outlets. Use this mode to send air to
the rear of the vehicle. Keep the area under the
front seats free of objects that could obstruct
airflow to the rear of the vehicle.

The right knob can also be used to select defog or
defrost mode. For more information, see
“Defogging and Defrosting” later in this section.

9

(Fan): Turn the left knob clockwise or

counterclockwise to increase or decrease the fan
speed. Turn the knob counterclockwise until it
stops to turn off the fan. The fan must be turned
on for the air conditioning compressor to operate.

@

(Recirculation): This mode keeps outside air

from coming in the vehicle. It can be used to
prevent outside air and odors from entering your
vehicle or help heat or cool the air inside your
vehicle more quickly. Press this button to turn the
recirculation mode on or off. When the button
is pressed, an indicator light will come on.
The air-conditioning compressor also comes on.
The recirculation mode can be used with vent and
bi-level modes, but it cannot be used with floor,
defog, defrost or outside air modes.

Temperature Control: Use the driver’s and
passenger’s temperature levers to increase or
decrease the air temperature inside your vehicle.

u

A/C (Air Conditioning): Press this button

to turn the air-conditioning system on or off. When
A/C is pressed, an indicator light in the button
will come on to let you know that air conditioning
is activated.

You may notice a slight change in engine
performance when the air-conditioning compressor
shuts off and turns on again. This is normal.
The system is designed to make adjustments to
help with fuel economy while still maintaining
the selected temperature.

204

Advertising