Buick 2007 Rendezvous - Manual (Page 247)

Your vehicle was originally programmed to
LIGHTS. The mode may have been changed
since then. To determine the current mode, or to
change the mode, do the following:
1. Follow the instructions for “Entering
Programming Mode” listed previously.
2. Follow the instructions for programming
HEADLMP EXIT DELAY earlier in this section,
to make sure which mode it is programmed to.
3. Press the MODE button until UNLOCK
FEEDBACK appears on the DIC.
4. Press the SET button until the arrow is before
LIGHTS or OFF.
5. Press the MODE button until you have
determined which mode you prefer, to
follow with the personalization.
The mode you selected is now set. You can either
exit programming mode by following the
instructions later in this section or program the
next feature available on your vehicle.
Lock Feedback
The lock feedback feature can be programmed to
one of the following modes:
OFF: When LOCK is pressed on the Remote
Keyless Entry (RKE) transmitter, the headlamps
and parking lamps will not flash and the horn
will not sound.
LIGHTS: When LOCK is pressed on the RKE
transmitter, the headlamps and parking lamps will
flash briefly.
LIGHTS and HORN: When LOCK is pressed a
second time on the RKE transmitter within
five seconds, the headlamps and parking lamps
will flash briefly and the horn will sound.
247