Using song list mode – Buick 2004 Rendezvous User Manual

Page 250

Advertising
background image

RCL (Recall): Press this knob to see how long the
current track has been playing. To change the default
on the display (track and elapsed time), press the knob
until you see the display you want, then hold the
knob until the display flashes. The selected display will
now be the default.

BAND: Press this button to play the radio when a
CD(s) is playing. the inactive CD will remain safely
inside the radio for future listening.

CD AUX (Auxiliary): Press this button to play a CD
when listening to the radio.

Using Song List Mode

The six-disc CD changer has a feature called song list.
This feature is capable of saving 20 track selections.

To save tracks into the song list feature, perform
the following steps:

1. Turn the CD player on and load it with at least one

CD. See “LOAD CD” listed previously in this section
for more information.

2. Check to see that the CD changer is not in song list

mode. S-LIST should not appear in the display. If
S-LIST is present, press the SONG LIST button
to turn it off.

3. Select the desired CD by pressing the numbered

pushbutton and then use the SEEK SCAN right
arrow button to locate the track that you want
to save. The track will begin to play.

4. Press and hold the SONG LIST button to save the

track into memory. When SONG LIST is pressed a
beep will be heard immediately. After two seconds
of continuously pressing SONG LIST, two beeps will
sound to confirm that the track has been saved.

5. Repeat Steps 3 and 4 for saving other selections.

S-LIST FULL will appear on the display if you try to save
more than 20 selections.

To play the song list, press the SONG LIST button. One
beep will be heard and S-LIST will appear on the
display. The recorded tracks will begin to play in the
order that they were saved.

You may seek through the song list by using the SEEK
SCAN arrows. Seeking past the last saved track will
return you to the first saved track.

To delete tracks from the song list, perform the following
steps:

1. Turn the CD player on.

2. Press the SONG LIST button to turn song list on.

S-LIST will appear on the display.

3. Press the SEEK SCAN arrows to select the desired

track to be deleted.

3-110

Advertising