Securing a child restraint designed for the, Latch system -64, Securing a child restraint in a rear outside – Buick 2004 Rendezvous User Manual

Page 70: Seat position -64

Advertising
background image

Securing a Child Restraint Designed
for the LATCH System

1. Find the anchors for the seating position you want

to use, where the bottom of the seatback meets the
back of the seat cushion.

2. Put the child restraint on the seat.

3. Attach the anchor points on the child restraint to the

anchors in the vehicle. The child restraint
instructions will show you how.

4. If the child restraint is forward-facing, attach the top

strap to the top strap anchor. See Top Strap on
page 1-57
. Tighten the top strap according to
the child restraint instructions.

5. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect the
anchor points.

Securing a Child Restraint in a Rear
Outside Seat Position

1-64

Advertising