Clarity Cordless Telephone - Manual (Page 14)

base of the phone downward to secure it on the
wall.
5. Plug the adapter into a standard AC power
(electrical) outlet.
6. Press and lift out the handset holder tab, turn it
around so the narrow tab end extends out and
slide back into its slot. This will hold the handset in
the cradle when the phone is wall mounted.
7. Lift the base’s antenna to a vertical position.
8. Set the Tone/Pulse switch located on the end of the
base to correct dialing mode. Please check with
your local Phone Company if uncertain of the type
of service.
9. Place handset in the cradle to begin initial
charging. Remember, you must charge the phone
for at least 12 hours before you use the phone for
the first time.
Note:
Remember, you must charge the phone for at
least 12 hours before you use the phone for the first
time.
HANDSET BATTERY INSTALLATION
The C4205 uses a 3.6Volt 600mAh NiMH
rechargeable 3 cell (AAA Type) battery that is
included with your unit.
14