Clarity Cordless Telephone - Manual (Page 30)

TROUBLESHOOTING
The unit will not operate/no dial tone:
• Verify the TALK Button is lit.
• Verify the AC Adapter is securely plugged into AC
outlet, the base and the telephone.
• Verify the telephone line cord is securely plugged
into the wall jack and the telephone.
• Make sure the base antenna is in an upright
position.
• Make sure the handset battery is fully charged.
• Verify the telephone is in the correct dialing
mode, tone (touch) or pulse (rotary).
• Make sure you are in the usable range of the
base station.
• Reset the security code by placing the handset
in the base for 5-10 seconds.
The phone does not ring when you receive a call:
• Make sure the RINGER switch on the handset
and base are set to ON.
• Verify the AC Adapter is securely plugged into
AC outlet, the base and the telephone.
• Verify the telephone line cord is securely
30