Caring for your washer, Care during periods of non-use, Winter storage or moving care – Whirlpool RAM4132B User Manual

Page 19: Non-use/vacation care, Saving energy

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

L A U N D R Y T I P S

Caring for your washer

• Wipe up detergent, bleach, and other spills with

a soft, damp cloth or sponge as they occur.

• Remove hard water deposits using only

cleaners labeled as washer safe.

• If the washer interior needs cleaning (for

example, after tinting or dyeing), put 1 cup
(250 mL) of chlorine bleach and 2 cups
(500 mL) of detergent in the washer. Run
through a complete cycle using hot water.

If staining occurs on following loads, repeat

the process.

• Sharp or metal objects can damage your

washer. Check pockets for pins, clips,

money, bolts, nuts, etc. Do not lay these
objects on your washer after emptying
pockets.

NOTE: Operate your washer only when you
are at home.

Care during periods of non-use

Winter storage or moving care

Install and store your washer where it will not

freeze. Because some water stays in the
washer, freezing can damage it. If your washer

is stored or moved during freezing weather,

winterize it.
1. Shut off both water faucets. Disconnect the

drain water inlet hoses.

2. Put 1 quart (1 L) of R.V.-type antifreeze in

the basket.

3. Run washer on a drain and spin setting (see

page 9) for about 30 seconds to mix the
antifreeze and water.

4. Unplug power supply cord.

To use the washer again:

1. Flush water pipes and hoses.

2. Reconnect water inlet hoses.

3. Turn on both water faucets.
4. Reconnect power supply cord.
5. Run the washer through a complete cycle

with 1 cup (250 mL) of detergent to clean

out antifreeze.

Non-use/vacation care

1. Unplug power supply cord or turn off

electrical power.

2. Turn off water supply leading to your

washer. This will help avoid accidental
flooding while you are away (for example,
due to a water pressure surge).

Saving energy

• Use warm or cold wash water for most loads.

Use hot water only when washing heavy,

greasy soils or whites.

• Use cold rinses.
• Wash full loads.

• Use lower water levels when washing small

loads.

• Use your washer during off-peak hours. (Ask

your power company for details.)

19

Advertising