Whirlpool B2lDK - Manual (Page 10)

U S I N G Y O U R R E F R I G E R A T O R
Adjusting the lateral-adjust shelf
To slide shelf side-to-side:
1. Lift slightly on shelf front.
2. Slide to desired location.
3. Lower shelf front to level position.
NOTE: You do not have to remove small
Kerns from the shelf before moving K side-to-
side. You may need to rennove larger Kerns.
Lift front slightly.
Then slide to new location.
To remove the shelf:
1. Remove all Kerns from the shelf.
2. Hold back of shelf wKh one hand.
3. Lift front of sheK to 45° angle.
4. Lower shelf slightly to release shelf from
upper channel of track. Then pull shelf
straight out.
NOTE: SheK is heavy. Make sure you use
both hards when removing sheK.
To remove shelf track:
1. Lift both sides of track slightly.
2. Pull track straight out.
To replace shelf track:
1. Guide track hooks into the sheK support
slots on the back wall of the cabinet.
NOTE: Make sure all three track hooks
are in slots and that the slots are parallel
to each other.
2. Push track backward and down.
3. Check that track is completely seated in
the sheK supports.
10
Hold wKh both hands
and lift front to 45° angle.
Hold both sides and
lift up and out.
SheK
• support