Adjusting the door bins, Adjusting the door bin glides, Removing the crisper and crisper cover – Whirlpool 8ED27DQ User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting the door bins
To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push bin down until it stops.
Support button
Adjusting the door bin glides
The door bin glides can be used to secure odd
shaped items or to separate other items.
1. Grasp glide.
2. Slide glide along bin.
Removing the crisper and crisper cover
To remove the crisper:
1. Slide the crisper straight out to the stop.
2. Lift the front slightly.
3. Slide out the rest of the way.
4. Repiace in reverse order.
To remove the cover:
1. Hold cover firmly with both hands and lift front
of cover off supports.
2. Lift cover out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on walls
of refrigerator.
2. Lower front into place.
Pull out to the stop,
lift the front
and pull again.
Lift the cover
front, then the
back.