Starting your washer, Select water, Temperatures – Whirlpool LA57lOXP User Manual
Page 4: Load sizes and water levels, Select a 1. load size select water 2. temperatures
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your washer
Before starting
your washer:
1, Measure and add detergent
2. Place sorted load in washer
3 Start washer
Select a
1. LOAD SIZE
Select WATER
2. TEMPERATURES
• Turn the knob to point at a setting
that describes the size of load you
wantto wash.
• Set the knob on or between EX
SMALL (a few items) and LARGE
(a full load).
See your "Laundry Guide" for details
on load sizes.
• Match the wash and rinse water
temperatures to the type of fab
rics and soils being washed.
• This drawing shows a warm wash
(top temperature) and cold rinse
(bottom temperature) selection.
Recommended wash temperatures
can be found in your "Laundry Guide.”
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
'Approximate
fill with load.
CAUTION:
DO NOT
OVERLOAD WASHER.
LARGE
(16.9 gals./64.0 L)*
MED
(13.5 gals./51.1 L)*
EX SMALL (9.9 gals./37.5 L)*