Portable two-faucet connections – Whirlpool RAP5244A User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
W A S H E R C O N N E C T I O N S
To disconnect washer:
1. Unplug the electrical power cord and put it
back in its storage area.
2. Turn the water faucet off.
3. Press the red water flow button to release
the water pressure.
4. Move the locking collar down and pull the
hose connector down to disengage from the
faucet adapter.
5. Drain water from the hoses through the
hose connector.
6. Hang the hoses on the storage rack.
Locking
collar
Water flow
button
Hose
connector
Portable two-faucet connections
If you have two separate water connections,
your washer can be connected to both the hot
and cold water faucets using Kit #3430190.
This kit can be purchased from your Whirlpool
Dealer.
Connecting the washer:
1. Connect the hot and cold water inlet hoses
to the hot and cold faucets.
2. Secure the drain hose to the sink or
standpipe.
3. Slowly turn the water faucets on all the way.
4. Plug the power cord into a 3-prong
grounded outlet.
To disconnect the washer:
1. Unplug power cord and return it to the
storage area.
2. Turn water faucets off.
3. Disconnect the drain and water supply
hoses. Hang them on the storage rack.