Permanent press cycle, Délicates cycle, Using rinse and spin – Whirlpool RAP5244A User Manual

Page 9: What happens in each cycle

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

O P E R A T I N G Y O U R W A S H E R

Permanent Press cycle

The Permanent Press cycle teatures a cool­
down rinse, and low spin speeds to reduce
wriniding.
• Use NORMAL SOIL, 10 minutes of wash

time, to clean moderately soiled permanent
press and some synthetic fabrics.

• Use LIGHT SOIL, 6 minutes of wash time, to

clean lightly soiled permanent press and
some synthetic fabrics.

NOTE:

The washer pauses briefly during the

wash cycle. This is normal for washer
operation.

Délicates cycle

The Délicates cycle features a reduced
agitation speed for gentle soil removal. Low
spin speeds reduce wrinkling.
• Use 8 minutes of wash time to clean lightly to

moderately soiled delicate items and wash­
able knits.

Permanent preme cycle

P

DELICATES 4

Délicates cycle

Using rinse and spin

When using extra detergent for heavily soiled
clothes, or washing special-care items, you
may want an extra rinse and spin.
1. Push Cycle Control Knob in and turn

clockwise to one of the dots, as illustrated.

2. Pull Cycle Control Knob out. The washer

will fill to selected load size, agitate, drain,
and spin.

What happens in each cycle

When the Cycle Control Knob is set to a
number and pulled out, the washer fills (with
the selected water temperature) before
agitation and timing start. The washer will

begin agitating immediately after filling;
agitation can occur with the washer lid up or
down. After agitation starts, the knob turns
clockwise until it points to OFF and the cycle
ends.

The washer pauses briefly throughout each
cycle.

These pauses are normal for washer

operation. See chart on page 10.

Advertising