Displaying the ip-over-atm interface configuration – Cisco ATM and Layer 3 Switch Router OL-1911-05 User Manual

Page 23

Advertising
background image

24-23

ATM and Layer 3 Switch Router Software Configuration Guide

OL-1911-05

Chapter 24

Configuring ATM Router Module Interfaces

Configuring Classical IP over ATM in an SVC Environment

Displaying the IP-over-ATM Interface Configuration

To show the IP-over-ATM interface configuration, use the following EXEC commands:

Examples

In the following example, the show atm arp-server command displays the configuration of the interface
ATM 1/0/0:

Switch# show atm arp-server

Note that a '*' next to an IP address indicates an active call

IP Address TTL ATM Address

ATM1/0/0:

* 10.0.0.5 19:21 4700918100567000000000112200410b0a108140

The following example displays the map-list configuration of the static map and IP-over-ATM
interfaces:

Switch# show atm map

Map list ATM1/0/0_ATM_ARP : DYNAMIC

arp maps to NSAP 36.0091810000000003D5607900.0003D5607900.00

, connection up, VPI=0 VCI=73, ATM2/0/0

ip 5.1.1.98 maps to s 36.0091810000000003D5607900.0003D5607900.00

, broadcast, connection up, VPI=0 VCI=77, ATM2/0/0

Map list ip : PERMANENT

ip 5.1.1.99 maps to VPI=0 VCI=200

Command

Purpose

show atm arp-server

Shows the ATM interface ARP configuration.

show atm map

Shows the ATM map list configuration.

Advertising