Installing it properly, Leveling it – Whirlpool RT22AK User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
B E F O R E U S I N G Y O U R R E F R I G E R A T O R
Installing it properly
1. Allow Vi inch (1.25 cm) space on each
side and at the top of the refrigerator for
ease of installation.
2. If the hinge side of the refrigerator is to be
against a wall, you might want to leave
extra space so the door can be opened
wider.
3. The refrigerator can be flush against the
back wall.
4. If your refrigerator has an automatic ice
maker, hook up the ice maker water
supply. (See Installation Instructions.)
Leveling it
Your refrigerator has 2 front leveling
screws - one on the right and one on the
left. To adjust one or both of these, follow
the directions below.
1. Remove base grille. (See page 14.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclock
wise.
4. Check with level.
5. Replace base grille. (See page 14.
Right to raise;
ieft to lower
1-800-447-6737
WITH QUESTIONS OR COMMENTS