Soak cycle, Pre-wash cycle – Whirlpool 3LA5800XK User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

pre-wash

SET LOAD SIZE

SET WATER TEMPERATURE
PUSH IN KNOB, TURN TO

CYCLE AND TIME

PULL OUT TO START

SOAK CYCLE

This cycle is not for washing, it soaks, agi­
tates, spins out the water and stops (no

rinse). Use it for stained, yellowed, grey or
heavily soiled laundry with a detergent
or pre-soak product. Chlorine bleach,* if
wanted, should be added to the cycle you
use after the SOAK Cycle is over.

FILL

WASH

SOAK

To

2 Minutes

6 Minutes

Selected

m

Low

No

Level

w

Agitation

Agitation

urr pre-wash

• SET LOAD SIZE
• SET WATER TEMPERATURE
• PUSH IN KNOB, TURN TO

CYCLE AND TIME

• PULL OUT TO START

PRE-WASH CYCLE

Use tor heavily soiled items that may need
two washes. Use enough detergent for a
single wash. When the washer stops, add
more detergent and select a cycle*

WASH

6 Minutes

Low

Agitation

If You Need
Service or Help,
We suggest You
Follow These
Steps:

Before calling for service*...

Problems are sometimes caused

by little things you can correct without
tools. Check this list before you call for
service:

IF YOUR WASHER DOES NOT FILL:

• Is the power supply cord plugged in?
• Are both water faucets open?

• Is a fuse blown or circuit-breaker
tripped?
• Are the water supply hoses kinked?
• Is the Cycle Control Knob set and
pulled out?

10

Advertising