Stopping/restarting your washer, Selecting a cycle, Heavy cycle – Whirlpool Roper RAB4232DL0 User Manual
Page 6: Normal cycle, Permanent press cycle, Knits/delicate cycle
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O P E R A T I N G Y O U R W A S H E R
Stopping/restarting your washer
If necessary, you can stop your washer during
a cycle to add more clothes, or add fabric
softener to the final rinse (see page 8).
• To
stop
the washer at any time, push in
the Cycle Control Knob.
• To
restart
the washer, close the lid (if
necessary) and pull out the Cycle
Control Kriob.
Selecting a cycle
Use the information in this section to help
you make the best cycle selections for your
wash loads. Each cycle is designed for
different types of fabrics and soil levels.
Heavy Cycle
The Heavy cycle features high agitation and
spin speeds.
• Use 14 minutes of wash time to clean
large loads of heavily constructed fabrics
that are moderately to heavily soiled.
Normal Cycle
The Normal cycle features high spin speeds
to shorten drying time.
• Use 12 minutes of wash time to clean
cotton and linen fabrics that are rrKxJer-
ately to heavily soiled.
Permanent Press Cycle
The Permanent Press cycle features a cool
down rinse and low spin speeds to reduce
wrinkling.
• Use 10 minutes of wash time to clean
permanent press arxJ some synthetic
fabrics that are lightly to moderately soiled.
• The washer pauses briefly during the
Permanent Press cycle. These pauses are
normal for washer operation.
Knits/Delicate Cycle
The Knits/Delicate cycle features a reduced
agitation speed for gentle soil removal. Low
spin speeds reduce wrinkling.
• Use 8 minutes of wash time to clean
delicate items and washable knits that are
lightly to moderately soiled.