Normal cycle, Short/knits cycle, Permanent press cycle – Whirlpool 3366869 User Manual
Page 8: Rinse and spin cycle, Drain and spin cycle, Cycle options
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O P E R A T I N G Y O U R W A S H E R
Normal cycle
The Normal cycle features high agitation
speeds for maximum cleaning, and high spin
speeds to shorten drying time. Use this
cycie for cieaning cotton and iinen fabrics.
• Seiect HEAVY, 14 minutes of wash time
with warm water, to clean heavily soiled
loads.
• Select REGULAR, 10 minutes of wash
time with warm water, to clean moderately
soiled loads.
• Select COLD, 6 minutes of wash time,
to clean lightly soiled loads.
Short/Knits cycle
The Short/Knits cycle features a brief soak
and reduced agitation speed for gentle soil
removal. Low spin speeds reduce wrinkling.
Use this cycle for cleaning delicate items
and washable knits that are lightly, moder
ately, or heavily soiled. A cold wash will
provide 4 minutes of wash time. A warm
wash will provide 6 to 8 minutes of
wash time.
Permanent Press cycle
The Permanent Press cycle features a
cool-down rinse and low spin speeds to
reduce wrinkling. Use this cycle for cleaning
permanent press and some synthetic fabrics
that are lightly, moderately, or heavily soiled.
A cold wash will provide 4 minutes of wash
time. A warm wash will provide 8 to 10
minutes of wash time.
Rinse and spin cycle
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may want an extra rinse and
spin. Push the Cycle Control Knob in and
turn clockwise to RINSE. Pull the Cycle
Control Knob out. The washer will fill to the
selected water level, agitate, drain, and spin.
Drain and spin cycle
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water. Push the
Cycle Control Knob in and turn clockwise
to SPIN. Pull the Cycle Control Knob out.
The washer will drain and spin.
Cycle options
You may select different wash time and
water temperature combinations by first
selecting the water temperature (Warm
or Cold) and then turning to the new wash
time. For example, for 14 minutes of wash
time in the Normal cycle with cold water:
1. Push in the Cycle Control Knob and
turn it clockwise to the COLD setting.
2. Pull out the Cycle Control Knob and
allow your washer to fill.
3. When your washer has filled, push in
and turn the Cycle Control Knob to
HEAVY, 14 minutes of wash time.
4. Pull out the Cycle Control Knob.