Normal cycle, Low energy cycle, Cycle – Whirlpool 9200 SERIES User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Normal Cycle
A single wash for normal, everyday soiled loads.
(The Energy Guide Label is based on this cycle.)
Cycle time* is about 66 minutes plus the time
needed while the timer delays to heat the water to
140°F (60°C) in the wash (marked t) and, if
the Hi-Temp Option is selected, in the final rinse
(marked tt).
Low Energy Cycle
A single wash for pre-rinsed or lightly soiled loads.
Cycle time* is about 58 minutes plus the time
needed while the timer delays to heat the water to
140°F (60°C) in the wash (marked t) and, if
the Hi-Temp Option is selected, in the final rinse
(marked tt).
POT&PANS
HEAVY
NORMAL
LOW ENERGY
RINSE & HOLD
CYCLE
Rinse
Washt
Rinse
RInsett
Dry
Off
"Cycle time includes heated dry times.