Using rinse and spin, Using drain and spin – Whirlpool 3360462 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATING YOUR WASHER
Manual Soak cycle
(on some models)
The Manual Soak cycle features high speed
agitation and a soak to remove heavy soils and
stains that need pretreatment.
• After the Manual Soak cycle is complete,
push in and turn the Cycle Control Knob to
SPIN. See “Using drain and spin” below.
See “Auto Soak" on page 7 for additional
soaking information.
Manual soak cycle
Using rinse and spin
When using extra detergent for heavily soiled
clothes, or washing special-care items, you
may want an extra rinse and spin.
1. Push Cycle Control Knob in and turn
clockwise to RINSE, as illustrated.
2. Pull Cycle Control Knob out. The washer
will fill to selected load size, agitate, drain,
and spin.
Auto
Using drain and spin
A drain and spin may help shorten drying times
for some heavy fabrics or special-care items
by removing excess water.
1. Push Cycle Control Knob in and turn
clockwise until indicator points to SPIN, as
illustrated.
2. Pull Cycle Control Knob out. The washer
will drain and spin.