Load size tips, Water temperature tips, Selecting a load size – Whirlpool LLC7244AN0 User Manual

Page 6: Selecting wash-rinse temperatures, Operating your washer

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

OPERATING YOUR WASHER

Selecting a load size

Position the Load Size Selector at the setting

that corresponds to the size load you want to
wash. Select a load size based upon the size
of the load and the fabric you are washing.

See page 14 for additional loading information.

To change the load size setting after the

washer has started to fill, move the Selector to
the desired new setting.

Your washer has a knob or slide Load Size
Selector

• If your washer has a knob Load Size Selec­

tor, turn selector to the desired load size.

• If your machine has a slide Load Size Selec­

tor, you may set the load size anywhere on or

between the ex small and ex large settings.

NOTE: If your washer has RESET on the Load

Size Selector, change the load size selection by
first moving the Selector to RESET, then to the
new load size.

Load size tips

• Items should move freely in the washer. Do

not overload the machine or select a load size

that is too small for the wash load.

• Use a large load size setting for best results

with permanent press clothes.

• Reduce wash time when using a small load

size setting. Loads with only a few small items
need less wash time.

«vieaium

i_arge

Ex Large

Knob selector-settings may vary with model

Slide selector with "Reset"

□ □□□

Selecting wash-rinse temperatures

Match the water temperature to the type of

fabric and soils being washed. The top tempera­
ture is the wash water and the bottom tempera­
ture is the rinse water. Your washer has a knob,
CLEAN TOUCH™ or push button Water Tem­

perature Selector.

Water temperature tips

• Use warm wash water with the Permanent

Press and Delicate cycles. For heavily soiled
permanent press Items, use hot wash water.

• Always use cold rinse water for permanent

press fabrics.

• For heavily soiled permanent press or knit

clothes, pre-wash or pre-soak in warm water
before washing.

See the “Water usage guide" on page 18 for
more information.

Knob selector

CLEAN TOUCH selector-
an indicator appears
above the water
temperatures selected

Push button selector

Advertising