Adjusting the oven temperature control – Whirlpool FEP314B User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING YOUR RANGE
Adjusting the oven temperature control
Although your new oven is properly ad
justed to provide accurate temperatures, it
may cook faster or slower than your old
oven.
If, after using the oven for a period of
time, you are not satisfied with the baking/
roasting results, you can change the
temperature calibration by following these
steps:
1. Make sure the Oven Temperature
Control Knob is turned to the off position.
Pull knob straight off and flip it over.
2. Loosen the locking screws inside the
control knob. Note the position of the
notches.
3. To lower the temperature, hold knob
handle firmly and move the tooth a notch
counterclockwise. Each notch equals
about 5°F (2.5°C).
4. To raise the temperature, hold knob
handle firmly and move the tooth a notch
clockwise. Each notch equals about 5°F
(2.5°C).
5. Tighten the locking screws and replace
the control knob.
Locking
screws
To raise
Notches
13