Changing the light bulb, Ikwarning – Whirlpool 2183013 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U S I N G Y O U R R E F R I G E R A T O R
Changing the light bulb
ikWARNING
Electrical Shock Hazard
Before removing a light bulb, either
unplug the refrigerator or disconnect
the electricity leading to the refrigerator
at the main power supply. Turning the
Temperature Control to the OFF
position does not disconnect the
refrigerator from the power supply.
Failure to do so could result in electri
cal shock or personal injury.
To change the refrigerator light:
1. Disconnect refrigerator from power
supply.
2. Reach behind the Control Panel to
remove bulb.
3. Replace with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
NOTE:
Not all commercial appliance bulbs
will fit your refrigerator. Be sure to replace
a bulb with one of the same size, wattage,
and shape.
14
1
-
800
-
447-6737
WITH QUESTIONS OR COMMENTS