Whirlpool 2183013 - Manual (Page 7)

B E F O R E U S I N G Y O U R R E F R I G E R A T O R
Installing it properly
1. Allow 3 inches (7.5 cm) between over­
head cabinets and refrigerator top.
2. Aliow at ieast 1 inch (2.5 cm) between
the refrigerator condenser on the back
and the wail.
3. Allow V 2 inch (1.25 cm) on each side of
the refrigerator for ease of instaliation.
4. If the hinge side of the refrigerator is to
be against a wail, you might want to
leave extra space so the door can be
opened wider.
5. Level your refrigerator.
Leveling it
Your refrigerator has two front, adjustable
rollers to prevent rocking on uneven floors.
To adjust rollers:
1. Roll refrigerator into position.
2. Adjust roilers by turning the leveiing
screws, located at the front of the base.
• Turn clockwise to raise.
• Turn counterciockwise to lower.
NOTE: Rollers are adjusted correctly
when the refrigerator no longer rocks
when the doors are opened or closed.
3. Repeat this procedure whenever the
refrigerator is moved.
Use a screw­
driver to adjust
Roller
Lower
Leveling screw
Raise
NOTE: If you want the doors to close easier,
use the rollers to raise the front of the
refrigerator slightly.