Other operating instructions, Extra rinse option, Rinse and spin – Whirlpool LA9320XY User Manual

Page 10: Drain and spin, Extra rinse option rinse and spin drain and spin

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

other Operating Instructions

Extra rinse option

You can automatically add an extra
rinse and spin to the REGULAR cycle
using the extra rinse option.

• Touc^ Extra Rinse ON before the

REGULAR (^cle starts. The washer

will automatically go to an extra rinse
and spin after the REGULAR cycle is
completed.

• If no extra rinse and spin is wanted

in the REGULAR cycle, touch Extra
Rinse OFF. Make sure the OFF
indicator is showing. If Extra Rinse is
not selected, the Cycle Control Knob
will stop at the orange line before
EXTRA RINSE OPTION when the
REGULAR cycle is completed.

For an extra rinse in other cycles,

see “Rinse and spin*.

Rinse and spin

When using extra detergent for heavily
soiled clothes, or washing special-care
hems, you may want an extra rinse
and spin.

1. Push Cycle Control Knob in.

2. Turn clockwise to one of the dots

on the dial, as illustrated.

3. Pull Cycle Control Knob out. The

washer will fill to selected level,

aghate 2-4 minutes depending on

the cycle selected, drain and spin.

Drain and spin

A drain and spin may help shorten
drying times for some heavy fabrics or
special-care hems by removing excess
water.

1. Push Cycle Control Knob in.

2. Turn clockwise until indicator points

to the bar just before an OFF area
on the dial, as illustrated.

3. Pull Cycle Control Knob out. The

washer will drain and spin.

10

Advertising