Soak cycle, Liquid bleach dispenser – Whirlpool LA9320XY User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^
SOAK 14 OfF
Soak cycle
For best results, use warm water for
pre-washing stained laundry. Hot
water can set stains.
1. Use recommended amount of
presoak product or detergent.
2. Push Cycle Control Knob in.
3. Turn clockwise until indicator points
to a number next to SOAK.
4. Pull Cycle Control Knob out The
washer will start.
5. When the cycle is over, add
detergent for the next selected
wash cycle. The Soak cycle should
always be followed by a wash
cycle.
NOTE: See the Laundry Guide for
additional soaking information.
Liquid bleach dispenser
Always measure bleach. Do not
guess. Never use more than 1 cup
(250 mL) for a full load. Use less with
lower water level settings. Follow
manufacturer's directions for safe use.
Use a cup with a pouring spout to
avoid spilling.
1. Load the washer first
2. Pour measured bleach carefully
into dispenser. Do not let bleach
splash, drip or run down into
washer baisket. Undiluted bleach
will damage any fabric it touches.
3. Start the washer. Bleach will be
diluted automatically during the
wash part of the cyde.
11