Adding liquid chlorine bleach, Adding liquid fabric softener – Whirlpool 3363560 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

OPERATING YOUR WASHER

Adding liquid chlorine bleach

Use your washer’s liquid chlorine bleach

dispenser to add bleach to the wash load.
Always measure liquid chlorine bleach. Do

not guess. Never use more than 1 cup
(250 ml) for a full load. Use less with lower

water level settings. Follow manufacturer’s
directions for safe use. Use a cup with a

pouring spout to avoid spilling.
1. Load the washer.
2. Pour measured chlorine bleach carefully

into the dispenser. Do not let bleach

splash, drip, or run down into washer
basket. Undiluted bleach will damage any
fabric it touches.

3. Start the washer. Bleach will be diluted

automatically during wash part of cycle.

NOTE: Do not use this dispenser to add
powdered chlorine or color safe bleach to

your wash load. The dispenser is for liquid
chlorine bleach use only.

Adding liquid fabric softener

• Always dilute fabric softener with

'/2

to

1 cup (125 to 250 mL) warm water.

Undiluted fabric softener can stain fabrics.

• Add diluted fabric softener only in the final

rinse.

• Fabric softener should not be mixed with

other laundry products because greasy
stains may form. If stains form, remove by
wetting the stain and rubbing with liquid
detergent or a bar of soap. Rewash the
stained item.

• Too much fabric softener can make some

items (diapers and towels) nonabsorbent.
If this happens, use less fabric softener or

do not use it every time.

11

Advertising