What happens in each cycle – Whirlpool 3396315 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PERATING YOUR WASHER
What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to
the selected load size) before agitation and
timing start. The washer begins agitating
immediately after filling; agitation can occur
with the washer lid up or down. After agita
tion starts, the Cycle Control Knob turns
clockwise until it points to Off and the
cycle ends.
WASH
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
NOTE: A Gentle Wash system helps protect
your fabrics by reducing wash agitation
speed during the last few minutes of wash
agitation in the Regular and Permanent
Press cycles.
RINSE
Fill
3sl
Wash^
t Agitation speed is reduced in the last few
minutes of most cycles. This provides
better fabric care.
tsj
Drain-No agitation^
t The Permanent Press cycle partially
drains, fills, agitates briefly, and drains.
S^n
Fill
Ri^se
Drain-N^gitation
Spin-S^y rinse
Spin
A
Off
12