Removing accumulated lint from, Inside the dryer cabinet, Awarning – Whirlpool 3396315 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CARING FOR YOUR WASHER/DRYER
Removing accumulated lint from inside the
dryer cabinet
Lint can gather inside the dryer and be a
fuel for fire. Lint should be removed every
two to three years, or more often, depending
on dryer usage. Cleaning should be done
by a qualified person.
AWARNING
Electrical Shock Hazard
Disconnect power before cleaning.
Replace all panels before operating.
Use two or more people to move the
washer/dryer.
Failure to do so can result in death,
electrical shock, or other injury.
1. Unplug dryer or turn off power supply.
2. Remove the rear panel using a hex-head
screwdriver.
3. Remove any lint using a vacuum cleaner
or soft brush. Avoid damaging wires and
thermostats.
4. Replace rear panel.
5. Level the washer/dryer if necessary.
6. Plug in dryer or turn on power supply.
Thermostats
30