Starting your washer, Select a 1. load size select water 2. temperatures, Load sizes and water levels – Whirlpool LA7680XP User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starting your washer
Before starting
your washer:
1. Measure and add detergent
2. Place sorted load in washer.
3. Start washer.
Select a
1. LOAD SIZE
Select WATER
2. TEMPERATURES
■
To change the setting on the LOAD
SIZE SELECTOR, turn the knob to RESET,
■
Then turn the knob to point at a
setting that describes the size ot the
load you want to wash,
' Set the knob anywhere on or be
tween HAND WASHABLE (a few small
items) and EX LARGE (a full load).
See your "Laundry Guide” for details
on load sizes.
• Select wash and rinse water tem
peratures by pushing a button.
• This drawing shows a warm wash
(top temperature) and cold rinse
(bottom temperature) selection.
Recommended
wash
temperatures
can be found in your "Laundry Guide”
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
'Approximate
fill with load.
o
DO NOT
OVERLOAD WASHER.
EX-LARGE (20,5 gals./77.6 L)*
MEDIUM (13.9 gals./52.6 L)'
HAND WASHABLE (7.8 gals /29.5 L)*