Changing the drum light, Electrical shock and fire hazard, Warning – Whirlpool DRYERS User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C A R I N G F O R Y O U R D R Y E R
Changing the drum light
(on some models)
^WARNING
Electrical Shock and Fire Hazard
• Before removing light bulb, either
unplug the dryer or disconnect the
dryer at the main power supply.
• The bulb cover must be in place during
dryer operation to prevent overheating
and possible damage to fabrics.
Operating the dryer with the bulb cover
removed can cause the dryer to fail or
create a fire hazard.
1. Unplug the dryer or disconnect the elec
tricity leading to the dryer at the main power
supply.
2. Open the dryer door and remove the light
bulb cover from back wall of the dryer. Turn
the cover clockwise to remove.
3. Remove the light bulb by turning it counter
clockwise.
4. Replace the bulb with a 40-watt appliance
bulb only.
5. Replace the light bulb cover and lock in
place by turning counterclockwise.
6. Reconnect power supply.
20