The oven light – Whirlpool FGS387Y User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

C A R I N G F O R Y O U R R A N G E

The oven light

The oven light will corne on when you open the
oven door.

^WARNING

Electrical Shock and

Personal Injury Hazard

• Make sure oven and light bulb are cool

and power to the range has been turned
off before replacing the light bulb. Failure

to do so could result in electrical shock or

burns.

• The bulb cover must be in place when

using the oven. The cover protects the
bulb from breaking, and from high oven

temperatures. Because bulb cover is

made of glass, be careful not to drop it.
Broken glass could cause injury.

To replace the oven light:

1. Unplug appliance or disconnect at the main

power supply.
Remove the glass bulb cover in the back of

the oven by pushing the wire holder to the side

and pulling out bulb cover.
Remove the light bulb from its socket.
Replace the bulb with a 40-watt appliance

bulb.

2

.

3.

4. Replace the bulb cover and snap the wire

holder into place. Plug in appliance or
reconnect at the main power supply.

NOTE: The oven light should not be used during

the Self-Cleaning cycle. Use during the Self­
Cleaning cycle will shorten the life of the bulb.

26

Advertising