Whirlpool 9400 - Manual (Page 12)

U S I N G Y O U R D I S H W A S H E R
Cycle
A“-"s lows w iat ste ps are in each cycle Cycle
Time
(Minutes) Wash Rinse
Main
Wash Rinse Rinse Dry
Low Energy
A single wash for
pre-rinsed or lightly soiled loads.
NOTE: The cycle pauses while the
dishwasher heats water to 135“F
(ST'C) in the final rinse (marked t).
If the Hi-Temp Wash option is
seiected water will also be heated
in the main wash (marked tt). See
page 13.
•rt • •t • 60‘
Rinse & Hold
For rinsing a few items to be
washed one or more days later. Do
not use detergent.
• • 12
‘Cycle time includes heated dry time. Cycle time may vary depending on the temperature of
the water entering the dishwasher.
What happens in each option
Options can be selected by pressing the
OPTIONS pad. Each press of the pad
advances the selection to the next option.
You can select Heat Dry, Heat Dry and Hi-
Temp, Air Dry, or Air Dry and Hi-Temp. For
example, if the AIR DRY signal light is on
and you want to select the Heat Dry option,
press the OPTIONS pad twice.
HEAT DRY
n AIR DRY
HI-TEMP
OPTIONS
NOTE:
• All options can be changed any time
during a cycle.
• The Hi-Temp option is preset for the Pots
& Pans cycle, only Heat Dry or Air Dry
options can be selected.
• If the Rinse & Hold cycle is selected,
options are not available.
12