Select a 3. fabric selector – Whirlpool LA98OOXP User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOUCH RUN TO RESTART WASHER '
TOUCH HOLD TO STOP WASHER ■
Select a
3. FABRIC selector
A.
other selections. If you want a
cycle other than REG/HEAVY, touch
a different FABRIC selector within 8
seconds after turning on POWER
SWITCH.
B.
For more time. Touch HOLD if
you want more time to decide on
another selection.
• HOLD will stop the washer while
you make another selection. Then
push RUN.
If an Indicator Light does
not glow
after a Selector is
touched:
• The Selector was not touched on
the
lower half. Only touch Selec
tors in lower area beneath light.
• The Selector was not touched
before the 8 second selection
time ran out.
• The option you chose can't be
combined with the FABRiC seiec-
tion. See pages 6 and 7.
D.
Changing a Selection. Before
the washer starts, touch another
selector. This cancels the selection
you don't want.
If the washer has started, move the
POWER SWITCH to OFF.
• Then start back at Step 1 on
page 4.