Manual clean lint filter – Whirlpool RAM5243A User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
O T H E R F E A T U R E S
Manual clean lint filter
Clean lint filter after every load.
1. To remove, grasp the top of the agitator
with both hands. Pull upward to remove
agitator cap. Lint filter is attached to the end
of the shaft.
2. Detach lint filter by pinching forked ends of
shaft together. Slide lint filter off shaft.
3. Wash or wipe the lint filter clean.
4. Slide filter back into place on shaft (open
end up). Snap into place.
5. Push lint filter and agitator cap firmly back
into agitator.
Fabric softener
dispenser
Lint filter
10
Advertising