What happens in each cycle – Whirlpool RAM5243A User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O P E R A T I N G Y O U R W A S H E R
What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to the
selected load size) before agitation and timing
start. The washer will begin agitating immedi
ately after filling; agitation can occur with the
washer lid up or down.
WASH
After agitation starts, the Cycle Control Knob
turns clockwise until it points to # (Off) and
the cycle ends.
The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
Fill
m
Wash selected time'
Agitation speed Is reduced In the last lew minutes of
most cycles. This provides better fabric care.
Isj
Drain (or partial drain')
No agitation
The Permanent Press cycle partially drains, tills,
agitates briefly, and drains.
Spin
RINSE
Fill
m
Rinse
w
Drain-No agitation
Spin
lAI
Off