Using your range, Using the surface burners, Surface burner markers – Whirlpool FGP325A User Manual

Page 7: Burner heat settings

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

U S I N G Y O U R R A N G E

Using Your Range

In This Section

Page

Page

Using the surface burners..................

...............7

Adjusting the oven temperature control.

......13

Positioning racks and pans................ ....................9

Broiling............................................................. ..... 13

For best air circulation........................ ..................10

Energy saving tips.......................................... .......14

Lighting standing pilots...................... ................. 11

The oven vent.................................................. ......14

Baking/roasting.................................... ..................12

The anti-tip bracket......................................... ......15

To obtain the best cooking results possible, you must operate your range properly. This section gives
you important information for efficient and safe use of your range.

Using the surface burners

Your range is equipped with either standing pilots
or electric ignitors. Standing pilots must be lit
initially with a match following the directions on
page 11. The pilot light will remain lit when the
burners are turned off. To turn a burner on again,

just

push

in and

turn

the control knob to LITE

and the burner will light. Electric ignitors automati­

cally light the burners each time the control knob

is turned to LITE.

Push in control knobs

and

turn

them to the

LITE position. On electric ignitor models, the

clicking sound is the ignitor sparking.

Visually

check that burner has lit.

After the burner lights, turn

the control knob

to the desired setting. You can set the control

knob anywhere between HI and LO.

Surface burner markers

The solid dot in the surface burner marker shows
which surface burner is turned on by that knob.

Burner heat settings

Use correct burner heat settings (see next page).
If the heat setting is too high, it can:

• Char

bacon and cause curling.

• Make

eggs tough and crisp at the edges.

• Toughen

liver, fish and seafood.

• Scorch

delicate sauces and custards.

• Cause

a boilover.

Push in and turn

Advertising