Restarting your washer, Using selections together, Using your washer – Whirlpool LA980OXK User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Restarting your

Washer

If you stop your washer by touchi­

ng HOLD, you can restart it by touching

RUN, The washer "rennembers" and

starts from w'here it stopped

However, if you stop your vsasher

by moving the switch to POWER OFF,
every selection is canceled. They are
also canceled if a blown fuse or power
interruption stops the washer.

The w-ay you restart the washer

depends on what the washer was doing
when it stopped.

Filling for (or beginning of) the
wash cycle:

• Move switch to POWER ON
• Touch FABRIC Selector and options
• The washer will finish filling

[if needed) and wash according to the
new selections.

End of the wash cycle:

• Move switch to POWER ON
• Touch SPIN ONLY to dram and spin
• After the washer stops, again move
switch to POWER ON,
• Touch RINSE SPIN to till, rinse, dram
and spin the load

Filling for (or beginning of) the rinse
cycle:

• Move switch to POWER ON
• Touch RINSE SPIN to finish filling or to

finish the rinsing cycle.

Using Selections

Together

Your washer has Electronic Oon-

trols that let many selections work
together for the kind of wash you want.

There are many possible combi­

nations of selections,,,so many that

there isn't room to tell about each com­

bination possible.

The indicator lights will tell you

what you need to know. If the indicator

ight glows when you touch a selector,

the Electronic Controls accept the
selection. If it does not glow, the Elec­
tronic Controls reject the selection
1,

The indicator iight will glow and stay

glowing.

When this happens, your

selection has been accepted. The
washer will use that selection or
option while it is operating,

2,

The indicator iight will glow, but

another will go off.

This means that

your second selection cancelled the
first. For example, if you touched

REG HEAVY and decide you want
PERM'T PRESS, just touch PERM'T
PRESS, The REG. HEAVY Selection Is

cancelled and its indicator light
goes off,

3,

The indicator light will not glow.

The

Electronic Controls are designed

to reject any option that shouldn't be
used for the wash you selected. Eor
example, if you touched KNITS

GENTLE, you won't be able to gel irie
HOT WASH indicator light to glow

Pages 8 through 13 of this

Use

& Care Guide

tell what happens during

©och s©!©ctiori For ©C3ch scicctior'i

there are details on which can and
can't be used together.

Advertising