If you need assistance or service – Whirlpool Roper RAL5144BG0 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I F Y O U N E E D A S S I S T A N C E O R S E R V I C E
If You Need Assistance
Or Service
Have you blown a fuse or tripped the circuit breaker?
If you need more help, check the chart below.
PROBLEM
CHECK THE FOLLOWING
Washer will not fill
Is the power cord firmly plugged into a live circuit with proper
voltage?
Has a household fuse blown or circuit breaker tripped? Has a
time-delay fuse been used?
Are both hot and cold water faucets open?
Are the water supply hoses kinked?
Is the Cycle Control Knob set and pulled out?
Washer does not spin
Is the lid closed?
Is the power cord firmly plugged into a live circuit with proper
voltage?
Has a household fuse blown or circuit breaker tripped? Has a
time-delay fuse been used?
Washer stops during
a cycle
Washer pauses briefly at different times in each cycle. These
pauses are normal.
Is the power cord firmly plugged into a live circuit with proper
voltage?
Has a household fuse blown or circuit breaker tripped? Has a
time-delay fuse been used?
Washer fills and drains
without running
Is the Cycle Control Knob pointing to a number in the cycle?
Washer drains during
wash and rinse cycles,
or water siphons out
Adjust the drain hose so it is higher than the water level in the
washer.
22