Operating your washer, Before starting your washer, Starting or stopping your washer – Whirlpool Roper RAL5144BG0 User Manual

Page 5: Selecting a load size, Operating your, Washer

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

O P E R A T I N G Y O U R W A S H E R

Operating Your Washer

In This Section

Page

Page

Before starting your washer..................... ........... 5

Selecting a cycle and time................. .................6

Starting or stopping your washer............. ............5

Using rinse and spin...........................

Selecting a load size..................................

What happens in each cycle............... .................9

Selecting wash-rinse temperatures......... ........... 6

Operating your washer properly ensures maximum washing efficiency. This section gives you

important information to help you to select a cycle, time, and temperature for your wash load.

Before starting your washer

Add measured detergent. Then place a sorted NOTE: Remove any hang tags or temporary
load in the washer before starting. See page 12 labels before using your washer,
for additional “Before you wash” information.

Starting or stopping your washer

starting your washer:

1. Select a load size and water temperature.

2. Push in and turn the Cycle Control Knob

clockwise. Stop when the indicator on the

knob’s outer ring points to the number in the

wash cycle you want. The numbers are

minutes of wash time.

3. Pull out the Cycle Control Knob.

Refer to pages 6-9 for additional information to

help you make selections.

Stopping and restarting your washer:

• To stop the washer at any time, push in the

Cycle Control Knob.

•To restart the washer, close the lid (if neces­

sary) and pull out the Cycle Control Knob.

Selecting a load size

Position the Load Size Selector at the setting

that corresponds to the size load you want to
wash. Select a load size based upon the size
of the load and the fabric you are washing. See

page 12 for additional loading information.

To change the load size setting after the

washer has started to fill, move the selector to
the desired new setting.

Cycles may vary with model

Settings may vary with model

Advertising